STANDARD TOOLING FOR D2 / D4 / D5:
- Guide bush, all sizes and all shapes.
- D2 Counter-collet, round or profile, standard or over-gripping.
- D4-D5 Counter-collet, round or profile, standard or over-gripping.
- D2-D4-D5 Feed rollers, "V" or "Radius" type.
- Turret tool collets, all sizes.
- Straightening pads, carbide, fiber or nylon.
- Straightening bushes, carbide, fiber or nylon, round or profile.
- Safety bushes for automatic cut-out device, round or profile.
RECONDITIONING AND PART-EXCHANGE SERVICE:
- Guide bush bearing type D6-9-Mp16/B, MP16/C and MP16/D.
- Guide bush holder type D6-9-MP56/A, MP56/B, MP56/C and MP56/D.
- Tool head D2-D4-D5-D6 and D6S.
- Turret D4 and D5.
- Turret D6 and D6S.
- Complete machine reconditioning, D2-D4-D5-D6 and D6S, with or
without respray.
- Individual sub-assembly reconditioning, D2-D4-D5-D6 and D6S,
with or without respray.
- Retrofit of CN control on D2/D4/D5/D6 and D6S.
STANDARD TOOLING FOR D6 / D6S:
- Guide bush, all sizes and all shapes.
- Counter-collet, all types, round or profile, standard, extended nose, or
over-gripping.
- Tool collet for turret, all sizes.
- Tool collet for cross drill and back attachments.
- Die holders for turret and attachment, all types or to drawing.
- Milling arbor, drill Holder for back attachment.
- Spacer for turret counter-collet, all sizes from 4 to 16 mm.
- Straightening pad, carbide, fiber or nylon.
- Straightening bush, carbide, fiber or nylon, round or profile.
STANDARD TOOLING FOR D6 and D6S WITH 9.00 MM CAPACITY:
- Guide bush.
- Feed and Holding collet.
- Counter-collet, round and profile.
- Safety bush for automatic cut-out.
- Straightening roller for Mechanical, Hydraulic or Air-Feed attachments.
- Feed or Holding plate and clamp for air-feed type.
CARBIDE CUTTING TOOLS AND CAM BLANKS:
- Solid carbide tool Blanks, D2-D4-D5-D6, all grades, in
- pre-ground form, width 1.5/2.0/2.5/3.0/3.5/4.00/6.00 and
Hammer head.
- Solid carbide tool D2-D4-D5 and D6, all forms and all grades.
- Solid carbide flat centre drills, step drill and reamer.
- Solid carbide twist drill and step drill.
- Solid carbide slitting saw and form saw.
- Escomatic cam blank, all types, D2-D4-D5 and D6.
LAYOUT DESIGN AND CAM MANUFACTURING:
- For D2-D4-D5 including attachment 29, 30, 31, 32, 38, 39, 40, 41, 43,
44, 46, 47, 48 etc...
- For D6-D6S including attachment 8,10,15,16, 27, 28, 29, 31, 33, 34,
38, 41, 43, 47, 48, 51, 52, 53, indexing counter-collet MP601/N etc...
- Design and Manufacture of special tooling and attachment.
SERVICE CALL: Service call on site available.
TRAINING D2, D4, D5, D6, D9 Certified training centre No 82-74-01426-74
- Setter training course on site our in our works
- Basic machine maintenance course
- Cam design course